Steel plate conveyor
Collecting > Discharging > Cooling
Steel plate conveyors are designed for special applications and complete the ALFOTEC programme. The belts consist of several steel plates connected by hinges and are suitable for materials with extreme properties: e.g. high temperatures, heavy soiling, sharp-edged contours, contaminated with milling chips, moisture or emulsions. The belts are driven on both sides by single chains, sprockets and three-phase geared motor.
Suitable for:
- Oily small parts
- Hot conveyed goods
- Sharp-edged stamped parts
- And much more…
The advantages at a glance
- Solid construction for robust and rough use
- Flexibility in the belt design due to the possibility of attaching drivers or other attachments.
- Very narrow designs from 100 mm possible
- Depending on the application, we will design the appropriate link belt for you: smooth surface, perforated, slotted, studded
- Individual, robust and solid construction, also in Z-design and much more
- Reversible operation is possible as an option
- Temperature resistant up to +300° C
- Low maintenance requirements
Specifications
The following guide values apply to standard conveyors, in internal ambient conditions and for defined applications and goods conveyed.
| Length (per conveyor, fully assembled) | up to 6.000 mm |
| Useful width | up to 2.000 mm |
| Overall height (motor position below) | from 400 mm |
| Overall height (motor position lateral) | from 100 mm |
| Speed | up to 12 m/min |
| Surface load, standard | up to 350 kg / m |
| Drive (IE3/4) | Fabrikat SEW EuroDrive |
| Optional reversible operation | via Omega Station |
Application examples
