Projekt 21

Projekt 14

Projekt 14

From the loading ramp to intralogistics

Delivery period: May 2024

Our customer

The Lehnertz poultry farm in Habscheid in the Eifel region is now in its third generation and is expanding with Mr. Lambert Lehnertz. The newly built packing and storage hall with adjoining loading ramp covers approx. 4000 square meters. Equipped with the latest technologies and a high degree of automation, the owner is consciously focusing on a future-proof orientation – particularly in the area of traceability. There is a particular focus on animal welfare, sustainability and fair partnerships, the latter of which was even rewarded with 1st place in a competition for “Fair Partners” in 2022.

Clients

Merkmale

The challenge and solution

Our customer approached us even before the construction phase of the new production hall, which enabled efficient project planning and smooth execution of the pits, etc. A lifting device was required for the outside area of the loading ramp and a solution for the inside area that would connect the two production levels. A throughput of 6 pallets with a total of 6 tons of raw goods was to be ensured with one lifting operation. Pits are required for loading/unloading at ground level, which were planned and perfectly integrated before construction began, taking into account the platform dimensions. Outside, a flexible loading lift table was to be used for loading/unloading sprinters and light trucks with and without tail lifts.

Customer sketch

Loading lift table

The loading lift table for outdoor use is hot-dip galvanized and equipped with an internal hydraulic unit

  • Load capacity: 3,000 kg
  • Platform dimensions: 2,500 x 2060 mm
  • Lifting height: 1,600 mm
  • Overall height: 345 mm

In addition, overloading flaps, plug-in railings, safety chain curtains and a safety portal are installed.

Further information in the following video and on the product page!

Vimeo

By loading the video, you accept Vimeo's privacy policy.
Learn more

Load video

Single scissor lift table

The scissor lift table for indoor use is painted in RAL 7012 and equipped with an internal hydraulic unit

  • Load capacity: 6,000 kg
  • Platform dimensions: 3,000 x 2500 mm
  • Lifting height: 1,600 mm
  • Overall height: 460 mm

In addition, anti-tippers, safety chain curtain, pilot valve on the hydraulic cylinder, railings with doors and a safety portal are installed.

Further information in the following video and on the product page!

Vimeo

By loading the video, you accept Vimeo's privacy policy.
Learn more

Load video

Are you interested in a lift table?

Then get in touch with us now

  • Telefon

    +49 2196 887669-0

    Upload:
    0
      0
      Ihr Warenkorb
      Your shopping cart is empty.Back to shop